A Great Weekend and A Birthday Card for my Mom

I hope everyone had a wonderful weekend!! I had a great time this past weekend! I went with a couple of friends, Miriam and Delores to the Rubber Stamping and Scrapping Expo in St. Paul and then we met up with my friend and fellow Spellbinders DT member Donya and her aunt Michelle. We had a wonderful day hanging out together and going to all of the booths. I met some wonderful people including Dave from RubberNeckers Stamp Company, the people from Marco's Paper and Gina from Gina K Designs. I also met a few ladies who recognized me from my blog and the Spellbinders DT so that was really fun too!!

While we were there we did some shopping, you can't go to an Expo and NOT buy something!! LOL!! Then after we left the show we drove down to Burnsville and we all met up at the Olive Garden for a late lunch. The food was scrumptious as always!! It was an all around great day with girlfriends!!

This past weekend my Mom had her Birthday--HAPPY BIRTHDAY MOM!! I want to share with you the card that I made for her. The Designer Paper is from the Basic Grey-Stella Ruby Collection and it is soooo yummy!! I love all of the papers from that collection! In the upper left corner I stamped a flourish stamp from Fancy Pants-Bella Brush stamp set using Brilliance Coffee Bean pigment ink and I also sponged around the edges of the paper. I stamped the Hearty Vase Stamp from RN on the Nestabilities Large Classic Circle and backed it with a Large Petite Scallop Circle from Spellbinders. I used Brilliance Coffee Bean ink to stamp the image and colored it in using the Copic sketch markers and ABS. I also added some touches of sparkle to the flourish stamp and the floral arrangement using the Spica Gold glitter pen from Copic. Then I added all the fun embellishments-ribbon, brads, prima and a word charm.

Here are the Copic markers I used.
On the vase of flowers I wanted it to look like there was babies breath in the floral arrangement so I added some liquid pearls from Ranger using a stylus. This is very easy to do, just use the small end of the stylus and dip it into the liquid pearls and then lightly tap on your paper. Here is a close up of the vase.

Supplies~
Paper-Basic Grey-Stella Ruby, Prism-Prismatics Frosted Yellow, WorldWin-Treasures Deep Brown & Sage, Curious Iridescent-Cryogen White
Ink-Brilliance-Coffee Bean
Stamps-RubberNecker Stamp Company-Stamp Oasis Hearty Vase, Fancy Pants-Bella Brush
Tools-Spellbinders-Wizard Universal Die Cutting & Embossing Tool, Lg. Petite Scallop Circle Nestabilities, Lg. Classic Circle Nestabilities, Fiskar-1/4 inch Hole Punch, Stylis
Other-Prima-Flowers, Offray Ribbon-Sheer Willow, Copic-Sketch Markers (as shown above), ABS, Spica Gold Glitter Pen, Ranger-Liquid Pearls, CTMH-Brown Brads, Walmart-Copper Word Charm, Beacon-Zip Dry Adhesive

Thanks so much for stopping by today!! I have several new designs that I will be showing you over the next few days so be sure to stop by often! I just got to thinking I never did post the cards and a gift box that I made for Mother's Day--sounds like a plan for tomorrow!

I hope your Monday was Marvelous!!

Smiles!
Heidi

Spellbinders Technique-Reverse Stenciling Tutorial & a New Shape Card

Today I want to share with you a New Spellbinders Technique called Reverse Stenciling. Michelle Klomp, one of the Spellbinders DT members came up with this fun & easy new technique. This is a technique that I did on the birthday card from my last post.

As I'm sure a lot of you already know with the Spellbinders dies you can Cut, Emboss & Stencil. If this is something that you didn't know here is how you would do the stenciling, after you cut &/or emboss you turn the die over to the smooth side, then you can use ink & a sponge to do the stenciling. Doing this will add even more detail to your die cut.

Here is a picture of basic Stenciling. To do the Reverse Stenciling first you make one pass through the Wizard to do the cutting. Then you remove the die cuts from the die. Placing the die with the cut side up (ridges) ink the inside part of the die. After you are done with the ink put the die onto the white cutting mat & then carefully place the die cut back into the die. To protect the mats from getting ink all over place a piece of scrap paper on top of the die, then the tan embossing mat & another white cutting mat and put it through the Wizard.

Here is a picture showing three different styles of the die cuts.
1. Cut & Embossed 2. Cut, Embossed & Stencil 3. Cut, Reverse Stencil & EmbossJust as a note, you can also use Copic markers and airbrush system to do the stenciling. Like I said this technique is really fun and easy but I love the different effect it gives the die cut. What do you think?

Yesterday I was finally able to have a fun play day and let me tell you it was way over due! Last week I got a package from Spellbinders with lots of fun new dies & yesterday was the first chance I had to open them up and play around.

Here is one of the cards that I made yesterday.In my package I received the new MegaNestabilities which are long rectangles, classic and scalloped. I used the largest scalloped rectangle to make a shape card. These are really easy to make, take a piece of fold CS and let the die hang over just a bit on the folded edge and run it through the Wizard. When you are doing this you might want to run it through twice since it is cutting through two pieces of CS. These cards will fit perfectly into a 3-5/8 x 6-1/2 envelope.The stamped image Celtic Goddess is from RubberNecker Stamp Company. I cut out an oval using the large classic oval nest and before I removed the CS I stamped the image using Graphite Black Brilliance ink. The wings are from the ATC card die. I used Cryogen White CS for both the oval and the wings. I really love the little bit of shimmer this CS has, it's not too overpowering. If you look at the close up picture you can see the shimmer on the face of the goddess image. The crown is Grungeboard from the Elements Swirls set. I used distress inks and some metallic silver ink to color the crown and then added some silver stickles around the swirls and some rhinestones for bling. The sentiment is from Hampton Art Stamps.

All of the coloring was done using Copic sketch markers and the airbrush system. Here are the markers that I used.Supplies
Stamps-RubberNeckers-Celtic Goddess Celestial Dreams 1107SO, Hampton Art Stamps-Art Soul
Paper-Cut Card Stock-Curious Iridescent Cryogen White, SU-Night of Navy, Almost Amethyst
Ink-Brilliance-Graphite Black, Ranger-Distress Ink- Weathered Wood, Worn Lipstick, Dusty Concord, Encore-Ultimate Metallic Silver
Spellbinders-Wizard, Universal Embossing & Die Cutting System, MegaNestabilities-Large Classic (S4 142) and Scalloped (S4 143) Rectangles, ATC Card (S4 073), Classic Large Oval (S4 110) Nestabilities
Copic-Sketch markers as shown above and the ABS
Other-Ranger-Silver Stickles, Joann's-Rhinestones

Thanks so much for stopping by! I hope you enjoyed the tutorial and if you make any cards using the Reverse Stencil Technique I would love to see them so please leave a link to your card in the comments. Have a Terrific Day!!

Smiles!
Heidi

How long has it been?

To long, if you ask me!! I have been keeping very busy with Spellbinders DT projects, orders and life! I hope to be able to share some of my Spellbinders DT projects with you all very soon.

The card I would like to share with you today is a Birthday card that I made for my Dad. His birthday was April 23rd--Happy Birthday Dad!!! My Dad LOVES to garden!! Him and my Mom have several beautiful flower gardens and a veggie garden in their yard. They have even been on the Art and Garden tours. The stamped image is from RubberNeckers Stamp Company. I love trees and I think this one is going to be a favorite! I colored in the image of the tree using Copic sketch markers. The die cuts were done using the Wizard-Universal Embossing and Die Cutting System from Spellbinders along with the Bugs die and the Wheelbarrow die. On all of the die cuts I did a NEW technique called Reverse Stenciling. Michelle Klomp from the Spellbinders DT came up with this new technique. I will be posting a tutorial on this tomorrow, so be sure to stop back. *wink* The flowers in the wheelbarrow are rub-ons. I found the sentiment at Scrapbook.com, it is a great resource for finding Quotes, Phrases, Poems and Titles for all of your paper crafting projects.

Thank you so much for stopping by!! I hope you are having a great week so far and don't forget to stop back tomorrow for the Reverse Stencil tutorial!

Smiles!
Heidi

Not Your Typical Anniversary Card

This past Sunday was mine and my husband's wedding anniversary. I wanted to make him a card for our anniversary and I got to thinking that he has seen all of my 'guy' stamps, so I wasn't sure what to do. So I had to do some thinking on that one! I also wanted the card to be special-something just for him. Eric collects dragons like the ones from the Bradford Exchange and I thought it would be really fun to make him a card with a dragon. I know not your typical anniversary card! My next thought was how do you make a card with a dragon and still find the romance? Well here is what I came up with.~I found the picture of the dragon and printed it out. Then I covered it with micro beads and added some rhinestones for some bling! I had a pattern for flames and I did some airbrushing with the Copic markers and the ABS to add the colors. Then cut out the flames and outlined them using the black Spica glitter pen. I also added a little hardware and ribbon along with the sentiment.

Here is a close up of the dragon.~
Now for the inside of the card. Here is where the 'romance' comes in! lol!! I put a poem on the left side and another sentiment on the right. I also did a little more airbrushing on the inside of the card.I am happy to say He LOVED it!!

Supplies~
Cardstock-All WorldWin
Stamps-No Stamps this time around! Everything was printed off the computer.
Ink-Distress Ink-Frayed Burlap--Ranger
Markers-Copic Sketch-R27, YR24, Y15, Y19, YR04, E15 and the Copic ABS, Spica Black Glitter Pen
Other-Wonder Tape, Micro Beads, Rhinestones--Michael's, Hardware and Ribbon, Foam Tape-From My Stash, Fabri-tac, Gem-tac--Beacon Adhesives

Thanks so much for stopping by today!! I hope you enjoyed a different style of creativity! I hope you day is filled with sunshine!!

Smiles!
Heidi

Think Spring!! Tulip Card

This past week I received a WONDERFUL package from Rubbernecker Stamp Company!! This is the first time I have ever used RN stamps and I have to say I LOVE them!! They are unmounted deeply etched Red Rubber with a cling back for mounting onto an acrylic block.

The past few days have been kind of cold and rainy and I think I am trying to will spring here! My plan just might be working, it was in the 60's yesterday and today it is supposed to be in the 70's! I thought this tulip image would be perfect for a spring card. When I worked at the floral shop I always looked forward to the tulips in the springtime. The background images are from a from a Floral Collage stamp. The stamp is a large background stamp but my CS was a little bigger than the stamp so I stamped it a couple of times to get complete coverage on the CS. I used versa mark ink and then lightly sprinkled on a little EP. Before heat setting the EP I also added some perfect pearls to add some shimmer. After heat setting the EP then I brushed off the excess perfect pearls.

The tulip image was colored in using Copic sketch markers. I love being able to blend all of the colors together! To do the tulips I used several colors from the pinks and purples, starting with the lightest colors first and then going to the darker colors. I also added some touches of sparkle using the Spica glitter pens. Once I was done with the coloring I cut out the image.I cut out a Classic and Scalloped Square Nestabilities using the Wizard, Universal Die Cutting and Embossing Tool to mount the tulip image on. Before adhering the tulips I took a craft knife and cut around a few of the flowers and then popped them up with a little foam tape behind each one. When doing this you do not need to cut the flower out completely, just cut around it leaving it attached at the stem. Doing this takes a little more time but it really adds a lot of dimension to your image!

Before adhering all of pieces together I also add the sheer ribbon and trim. To add the sheer ribbon I used a tape runner and for the trim I used Fabri-tac. Fabri-tac is great for adding trims and lace. If you don't want to wrap the trim underneath and have the extra thickness cut off the trim right next to the edge of the CS and add just a little dab of Fabri-tac. Doing this will hold the ends in place and keep it from fraying.

Of coarse I had to add a few touches of bling! I added a vintage style button to the trim and some swarovski crystals on the nestabilities.

Supplies~
Stamps~Floral Collage-able (263-05), Bold Florals-Tulips (168-05)--Rubberneckers Stamp Company
Cardstock~Whisper White--SU, Shimmer DP--DCWV, Med. and Dark Terrific Teal (colormates), Lovely Lilac (doublemates)---WorldWin
Ink~Brilliance-Graphite Black, Versa Mark--Tsukineko, Distress Ink-Dusty Concord--Ranger
Tools~Wizard, Universal Die Cutting and Embossing Tool, Classic and Scalloped Nestabilities--Spellbinders
Markers/Pens~Sketch Markers-R81, R20, RV11, RV17,V01, Vo4, BV000, BV04, B00, B21, B23, BG45, G03, G24, YG00, Y00, Spica Glitter Pens-Pink 02, Lavender 01, Melon 06--Copic
Other~Elegant Gold Tinsel EP--Enchanted Creations, Perfect Pearls--Ranger, Ribbon, Foam Tape, Trim, Button, Crystals--from My Stash, Fabri-tac, Gem-tac--Beacon


Thank you so much for stopping by today!! I hope you have a wonderful beginning to a new week and don't forget to hop on over to Rubbernecker Stamps and check out all of the great products they have to offer!! Also right now they have a Spring Madness Overstock Sale going on with lots of great deals so be sure to check it out!!

Smiles!
Heidi

Copic Three Dimensional Flowers Tutorial

I want to share with you how I created the three dimensional flowers that were on a wedding card from the last post. To create each flower I used three of the large flower shapes from the Spellbinders Flower Creation die and the Wizard Die Cutting and Embossing Tool. If you don't have this die you could also use punches, pre-made die cuts, or cut flowers freehand.

Step 1
As you can see in the picture I started out with white cardstock. All of the coloring for these flowers was done using the Copic sketch markers and the Copic ABS (air brush system). I started with the lightest color first, Barium Yellow (Y00). Start at the center of the flower using the brush tip, to do these strokes I lightly push down on the marker and pull up as I am coming out to the petal.

Step 2
For step two I did the same thing using a darker color, Chrome Orange (YR04).
Step 3
This was also done with a darker color, Cadmium Red (R27). I know this might seem like you are doing the same thing over and over and just covering up the lighter color with no results or maybe you are thinking why not just put the darker color on instead of doing all of these layers. But the great thing about working with the Copic markers is they blend and layering several colors will give you depth in you project.
Step 4
Using the same color as in step #3 lightly air brush over the entire flower.
Step 5
Using the Warm Red ColorBox ink and a sponge in all the edges of the petals. I wanted to use a slightly darker color to add more depth to the flowers.
Step 6
Using the Colorless Blender (0) and doing the same stroke as in step # 1 I pulled some of the color from the petals. Doing this lightens it up a tad and it also makes the faux veins of the flower show up more.
Step 7
This is the darkest color and the last color that will be added to the flowers, Lipstick Red (R29). Starting all the way in the center of the flower do the same stroke as in step #1 but do it with a slightly lighter hand. This will help to make finer lines.
Step 8
Since these flowers are three dimensional you can see the back side a little so I would recommend lightly airbrushing the back of each flower.
After you have all of the flowers colored then you will layer them. Glue dots work great for doing this. Make sure the petals are layered so you can see the petals on the bottom layers. Once you have this done then bend (fold) the petals to the center of the flower. You can also use the end of a small paint brush to curl the ends a little. For the center of the flower I used a larger circle brad and covered it with dimensional pearl paint and then added a pearl flower. Here is a tip**If you would like to keep your flowers popped up put a tiny bit of clear silicone behind each petal. I hope you have enjoyed this tutorial with the Copic markers and doing the three dimensional flowers. I encourage you to give this a try!! If you do I would love to see your designs, so please leave a link to your blog or online gallery in the comments. Also if you have any questions please feel free to ask!

Thanks so much for stopping by!! I hope you have a wonderful day and where ever you are I hope there is sunshine!!

Smiles!
Heidi

Lots of Pictures with a little bit of Everything

Ok, where to start! It was a busy weekend & I have a lot to share with you!

This past weekend my cousin Lana got married!! They had a BEAUTIFUL wedding and I am so happy for Lana & Swanny (Jeff)!! Here are some pictures from the wedding and the dance.


Lana and her Dad, my uncle John~Who gives this woman~
I LOVE the back of her dress--it was Gorgeous!!The Vows~
This is the country church where I went when I was little. I have always loved the alter!
The First Dance~Father and Daughter Dance~It was a mix of emotions both happy and sad. I'm sure some of you remember me talking about baby Alex, Lana and Swanny are Alex's Mommy and Daddy and last June little Alex passed away. I know Lana and Swanny miss there little Angel Alex so much!! We all do!! My aunt, Lana's mom asked if I could paint something for out at the cemetery for Alex. She had a double heart with silk flowers and had a little saying she wanted painted on there. Here is a picture of what I painted.Lana and Swanny had no idea that I was doing this, it was a special surprise for them. I have to share this other little bit with you--After we got to the reception the maid of honor and the best man both talked and thanked everyone for coming. Amber who was Lana's maid of honor told us that she had been praying and praying that the sun would come out on Saturday, even if only for a little bit. It has been really cold here with a mix of rain and snow, but prayers were answered on Saturday afternoon!! Lana and Swanny wanted to go out to the cemetery to be with Alex just for a few minutes and as they were walking out there the sun came out and stayed out for about five minutes before going behind the clouds again. I don't think there was a dry eye in the place!! Alex was dancing with her Mommy and Daddy.

I also have some creative inspiration to share with you! I made two wedding cards for Lana and Swanny, one from us and one for my Mom and Dad to give them.

Here is the card that was from my Mom and Dad.~The heart shapes are Spellbinders Heart Nestabilities (scalloped and classic) and the flowers were done using the Flower Creations die. I love making three dimensional flowers!! I also used the Copic ABS and Sketch Markers for coloring all of the die cuts. The flowers started out as just plain white CS.

Here is a close up of the flowers.~
Here is the card that was from us.~To make the cake I used the Spellbinders Square Nestabilities. I also stamped a lace image on the squares using Brilliance-Moonlight White ink and added some pearl trim on the edges. For the topper I used a tiny piece of tulle and little loops of white satin ribbon along with three tiny flowers from the Flower Creations die. All of the stamps are from CTMH. For a little touch of bling I added some red stickles.

How many of you have a teenage son with longer hair? Do you wonder if they will ever cut it? I know I have thought that many times over the past few years!! Well Guess WHAT?? On Saturday totally out of tin air Dusty said he wanted a haircut!! I about fell over--REALLY!! He has had longer hair for about four years!! I didn't know if he would actually go through with it or not but he did!!

Before~ Ready, Set, CUT!!!
OMGosh LOOK at ALL that HAIR!!WOW LOOK at ME!!
Here's one more. I can't believe how much older he looks!! Now that's scary for a mom!!He loves the haircut and actually said he wished he would have listen to us and gotten a haircut a long time ago!! He must be growing up (a little) seeing as we are getting smarter. you know how the saying goes the older you get the smarter your parents become. *wink*

Thanks so much for stopping by today!! If you like the wedding card with the three dimensional flowers check back soon, I am going to do a tutorial on them.

I hope you have a Wonderful Week!!

Smile!
Heidi

A NEW Technique! Adhesive Masking

Do you love the sparkle glitter adds to your projects? If so you will LOVE this technique!! I am a total glitter junkie and one night while I was playing around with my Spellbinders dies I came up with a New Technique!! The Technique is called Adhesive Masking. I am very excited about this technique and would love to share it with all of you! I took a lot of pictures while I was doing this technique. I don't know about you but I am a very visual person and I love to be able to see lots of pictures.

To start with this is what you will need.~

Supplies~
Spellbinders-Wizard Die Cutting and Embossing Tool or another die cutting system.
Spellbinders Dies-*this is an important note--Spellbinders dies are the only dies that are cut all the way through allowing you to also be able to use them as a stencil.
Xyron-any size machine *don't worry if you don't have a xyron!! You can also use sticker paper or any kind of paper with an adhesive backing.
White Cardstock
Assortment of Glitter-*ultra fine glitter works the best, it will get into all of the tiny spaces.

As you are going through the steps you can also click on each image to enlarge if you would like to.

Step 1
Take a piece of cardstock and run it through the xyron. If you don't have a xyron and you are using sticker or another adhesive paper you can skip steps 1 and 2.Step 2
Remove the clear covering from the cardstock.
Step 3
For placing your paper onto the die you want to make sure the side with the adhesive is down. If you used the xyron one side will be the cardstock and the other side will be the glossy paper with the adhesive from the xyron. Put the glossy side facing down onto the die.

Glossy---->Glossy facing down onto the die---->Step 4
Layer the mats and run it through the Wizard.
White Mat
Spacer Plate
Die (cut side or ridges up)
Cardstock
White Mat
Step 5
Once the shape is cut remove the piece from the die.Step 6
Peel off the backing to expose the adhesive. Once you have done this place the die cut back into the die with the adhesive facing down.
Step 7
Now for the messy but FUN part!! Time to add the glitter. While adding the glitter it helps to kind of rub it in with your fingers. Once all of the adhesive is covered with glitter then tap off all of the excess glitter. Step 8
Very carefully remove the die cut from the die. The best way to do this is to have the die on the table and pull the die cut up. This way if some tiny pieces of glitter come of they will fall down instead of getting on the the exposed adhesive.Step 9
Now you will add your second color of glitter.This is what your finished piece will look like. Isn't that cool!! Here are a few other pieces I have done using the Adhesive Masking Technique.
There are soooo many possibilities with the Adhesive Masking Technique!! I hope you have enjoyed the tutorial! I would love to hear what you think about the technique and if you give it a try please post a picture to your blog or a gallery and then leave me a link. I would love to see your creations!!

Have a wonderful day!!
Smiles!
Heidi